Відео

You made the door it shoulda had.nice job.

What's the difference between buying new woofers and rescrewing them in

😺🐈

Where did u get the metal

I upgraded my chimney size diameter to 3 inches. What size is yours ? Thanks

If you still have these speakers would you be able to tell me what the recommended fuse size is? Thanks

Can you make jerky with 80/20 ground beef

I have 2 KitchenAid Mixers and I love both of them!

I bought one of these also, I had them weld up the clean out, as it leaked a lot of air. I replaced the hinge on my door and I replaced the door handle. For the door handle I included a spring so you could push the handle back engage it and then let it go and it would hold the door better. I also backed up the door hinge on the stove with washers, this was so I could put gasketing around the door. I also went to a local muffler shop and had them cut me out another section for the chimney. This improved the draw. And the last modification I did was rip out the spark arrestor, and I bought stainless steel gutter guards. I slide them up with a broom handle, and when they're clogged I throw them away and put in a new one. I also cut the legs on mine so it would fit inside my tent. Although I love the Mica window, I do move my stove around a lot and I would be afraid of destroying that. But since you don't move your stove, I thought it was a brilliant idea. The last modification I did to mine, was used self vulcanizing tape on the base of the feet so they did not dig in to the welding blanket or the floor of my tent.

What kind of glue did you use? is the one for wood work?

I do not know if you know, but is it possible to make without cure, I am on a sodium restriction from my doctor. I assume it is fine, but do not know how long it will be shelf stable without the cure.

How has this little stove held up over the past 6 years?. Is it still a usuable, safe source of heat? Love your videos

Nice work wish I had one of those',Gby

Hey buddy excellent job on these modifications do you know if pop rivets would hold?? Although would make a PITA to change out the window if need be..

Funny.- I just searched, and found this video, looking for a tutorial for a pair of Advent Baby IIs I'm refoaming. These look like the Advent Heritage speakers a friend I know once had, back in the day.

Very confused about confection sugar. You started with 1/2 c. then went to 3/4 c / 1 c. So you gave 3 different amounts.

This is EXACTLY what I needed and WAAAAY better than the any of the vendor's videos on same which btw start out with the speaker already removed and on the "work bench". And that latter part was what I needed. Thank you and thank you UA-cam which has been great for a ton of my DIY stuff.

The Nesco Maple Bacon is the best! My god it's good, and my friends are always asking me to make more! www.amazon.com/gp/product/B01KDCZ1JE/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1&fpw=alm

Your wife must have been gone when you did this on the oak table. 😂

poggers

Wow. Nice job.

Why can't we leave the dough to rice in the same bowl

Do you have to use the mixer?

Good for you for teaching your daughter at this age. It's good for her to be mature and independent at young age

hi. does this rust in time?

Fantastic job on the stereo cooler.Absolutely perfect thank you so much.

i watched your video's on your stove. i like your door you have made. i am thing of getting one just wondering on cooking on it, would it cook say vegetables on it. take care

Awesome 👍👍👍

Thank you very much that's going to make it easy for me to pay my RC truck body now

Enjoyed Your Video. Probably For The Money, This Is As Good A Stove As The More Expensive Stoves.

Very helpful and informative.

I would have returned this camera if you didn't make this video to help me figure this thing out. Thanks for your efforts!

Thanks for the video bro

Your pool needs chlorine really, really badly! Hahaha nice video!

Wouldn't it be better to simply manufacture a shim to put under the hinge, tack weld it to the hinge and grind down the welds?

what about cracking the oven door too

Very nice work. I have one of these and I never considered making modifications to it. I especially like the viewing window idea. That's pretty snazzy.

I make my own mini tent stoves in my brother's tin shop and they work great but I want to add the front window. I have the mica tiles but where did you get the window frame? I can make one but I'd rather just buy one! Thanks

Nice job!

wonder if some soy sauce and other stuff would be good too while your mixing all this together questions?? what ya guys think ??

Nice upgrade.

I've been debating getting one of these to put in the screened in room that's above my boathouse. In the winter I cover the screens on 2 sides and the back with large pieces of thick waterproof Gore-tex material , and the side that faces the water with clear plastic to let me still have a view. Then I use it as my winter hammocking spot at home so I can save wear and tear on my expensive tarps bc I hammock camp in the winter. Having a stove like this with these mods would make my little "hammock man cave" that much more cozy and comfortable. Thanks for the great ideas!

so how is the tms today has it held up? thank you

Only question is what about smoke maybe add fan to it??

I didn't know these lexan bodies were painted on the inside and removed the protective film. How can I replace it? BTW one of the best how-to videos on this topic.

Very good

I may have missed it but what temp do you set the oven on?

Too high of leg if you’re putting that in a tent you need your heat to be a lot lower and put a piece of metal in underneath your air chamber that you burn upon and your bottom will never get hot I have a 55 gallon drum and I can have that stove red hot and I can put my hand on the button and hold it there for hours the bottom never gets hot but like I said that’s me but that’s what I would do because you need nearest space between the bottom of your stove And the piece you put in a boat 2 inches well for that stove ago in inch it will still do a enough that your bottom of your stove doesn’t get hot it just leaves near gap but it Hass to be tight from front to back and up the sides needs to go about 2 1/2 inches high up the sides so put them belly belly ridge that’s done like a trough but not a trough a rounded trough trough

For the door I would weld in a curved piece of metal to keep the flame from licking the maker that way it stays clear all the time but that’s me I’ve had to put them in when I put Pyrex in but there again you can have that Pyrex too tight because when it cools it cracks enjoy what you’re doing good job

And truthfully on that door I would’ve put an extra piece under the hinges not one piece but two and then I would’ve done a seam all the way around your door with another piece that way you can put the rope around and the heat rope around for the doors and seal it properly that way your door doesn’t work but still good job but I went down a little different but each his own